ASA-CF
ASA with carbon fiber. It stands up to sun and weather like ASA, and prints stiffer and truer to size with a clean matte finish.
~103–110°C (217–230°F)
Ask about ASA-CF
Designed in CAD, printed to order
A part made for your project.
Broken, missing or never made again? We design the part in CAD and 3D print it, for restorations, repairs and builds. Have your own printer? Get the print-ready files instead, with two rounds of edits included.
Watch it being made.
3D printing videos from our TikTok: designing the part, printing it and fitting it.
Get started
Get your part made.
Send a file, a sketch or a few photos. A quote comes back with no obligation.
- Every part gets its own quote
- Two rounds of edits included
- One part, or a few of them
Three steps to a finished part
- Send the file or describe the part
- Get the quote
- We print it, or send the files
Pricing
Every part gets its own quote.
3D printing and CAD design are both quoted for the job. No two parts are the same, so there is no price list. Send the file or describe the part, and we’ll email a quote, usually within one business day.
Business cards, card holders and coasters made around your logo are on their own page: made to order.
- Size and print timeA bigger or denser part takes longer to print. This is the largest part of the price.
- MaterialReinforced and specialty materials cost more than standard ones. We recommend the one the part needs.
- QuantitySetup is charged once per order, so the price per part drops as the count goes up.
- Design workNo file yet? CAD design is quoted from a sketch, photos or measurements. Two rounds of edits are included.
Want a price for your part?Send a file, a sketch or a few photos. A quote comes with no obligation.
How it works
From idea to finished part.
Send the brief
Describe what you need. Include a sketch, photos of an existing part, key measurements or reference files.
It’s designed
We model it in CAD. Tolerances and features are chosen to suit the material and how the part will be used.
Two rounds of edits
Review the design and request changes. Two full rounds of edits are included in every design.
Printed, or the files
We print the part, or send the final files with the source model. The files are ready for your own printer or any print service.
Have a part in mind?Send a sketch, photo or measurements and get a quote.
Print-ready files
Delivered in the formats you need, tested for printability.
STL3MFSTEP
Request a part
Two rounds of edits included
Two full rounds of revisions so the design fits and works as intended. More rounds are available if needed.
See how it worksMaterial guidance
A recommendation on which material and print settings to use (PETG, ASA, ABS, carbon-fiber nylon, TPU and more).
See the materials
Materials
The right material for the job.
Every design comes with a material recommendation. Pick a filament below to see what it is good for, or search by what the part has to stand up to. The bar shows heat resistance.
Choose a filament
Search by name, or by what the part has to stand up to:
PETG
Bonds strongly between layers and resists saltwater, fuel vapor and alcohol. Great for boat dashes, brackets and cupholders.
~70°C (158°F)
Ask about PETG ASA
Won’t yellow or turn brittle in the sun. Ideal for exterior trim, mirror caps, covers and fairings.
~98°C (208°F)
Ask about ASA ABS
Tough and slightly flexible, and it handles engine-bay heat. Good for clips, relay mounts and consoles.
~95°C (203°F)
Ask about ABS PA-CF
Nylon reinforced with carbon fiber. Very strong for its weight, with high heat and oil resistance.
~150–180°C (302–356°F)
Ask about PA-CF Polycarbonate
Nearly shatterproof. Built for guards, housings and parts that take hits and heat.
~140°C (284°F)
Ask about Polycarbonate TPU
Absorbs vibration and seals out water and oil. For gaskets, grommets, seals and bump stops.
Shore 85A–95A flex
Ask about TPU PLA
Prints with crisp detail and holds its shape well indoors. Good for prototypes, test fits and display parts. It softens in a hot car or in direct sun.
~55°C (131°F)
Ask about PLA
Get started
Request a part.
Describe what you need. We’ll reply with a quote, usually within one business day.
Replacing an existing part?
Send photos from several angles with a ruler or coin in the frame for scale, plus any part numbers. That’s usually enough to start.
Just have a quick question first? Ask it here for a reply by email.
Recent designs
Parts designed by DEETOE CO.
-
Custom business card holderShaped like a sailboat for Turk Lake Canvas, with the name on the hull -
Business card holderMade for Ardito & Sons LLC, with the name and services on the front -
Mic travel caseFitted to a wireless mic kit, with a company name on the lid -
Mooring cover ventLets a boat cover breathe. Caps for 3/4 in and 7/8 in poles -
Topper Shop badgeThree-color logo badge designed for The Topper Shop -
Boat cover ventLets moisture out while keeping rain out -
Boat plugCustom-sized marine fitting -
Pontoon plugDesigned from measurements of the original -
1970 Duster partDiscontinued restoration part rebuilt in CAD
Recycling goals: turning local plastic waste into parts.Scrap and 3D printer waste (PETG, ABS and PLA) turned into 3D printing filament.
Ready to start
Get your part made.
A DEETOE CO. team member replies within one business day.